Guests watch a custom piece get made and walk away wearing it, usually about two minutes after they pick it. Here's how a station runs at a Salt Lake City event, from the art proof to the last shirt.
Weeks before
You send the logo or artwork and we proof it. It locks about a week out so screens and transfers can be made in La Habra. We confirm garments, sizes and where the station sits in your schedule, and the truck is packed from that plan.
On the day
- The build: presses, ink, blanks, tables and crew arrive the day before and set up on about 10×10 ft per station.
- The choice: guests pick a garment, a size and a design or a patch. Choosing is what makes them care about it.
- The print: each press paces up to 60 pieces an hour, and a two-press station clears 100+ while the line is steady.
- The hand-off: the piece comes off warm and goes straight on.
What the room needs
About 10×10 ft per station, two dedicated 120V circuits, a level floor and a path for the line that stays clear of the doors. At the Salt Palace the power is part of your exhibitor order. See the venue checklist.
Choosing a method
A big crowd and one design point to the screen press. Full color or a name on every shirt points to DTF. A hat bar or embroidery adds a slower, nicer piece for a smaller group. Read the short answer or tell us about your event.
Salt Lake City planning notes
The Salt Lake City part of the plan
Most of these steps are the same anywhere. What's specific here is the travel and the rooms: the gear rides up the I-15 by truck, a Salt Palace booth runs on a marshalling schedule and a drayage slot, and a canyon lodge in winter needs a plan for the road.